IWR-Pressedienst.de

Pressemitteilungen der Energiewirtschaft seit 1999

fotolia 73444491 1280 256

Press Release

Herausgeber: Nordex SE

Entering new dimensions in inland regions: Nordex to unveil the high-performance inland N117 wind power system with a nominal output of 2.4 MW at EWEA 2011

- New wind class rating for the entire range optimizing portfolio for all wind regimes
- New efficiency packages boosting the annual energy yield of all Gamma Generation wind power systems

Hamburg - Nordex SE will be unveiling its new N117/2400 wind power system at the European wind power conference EWEA, which is taking place on March 14-17, 2011 in Brussels.

With a nominal output of 2.4 megawatts (MW), the Gamma Generation turbine has been specially developed for inland locations. Thanks to a rotor diameter of 117 meters and a rotor sweep of 10,751 square meters, the N117/2400 is the highest-yielding IEC 3 turbine in its class. In typical inland regions, it will achieve a capacity of over 3,500 full-load hours, thus exceeding other turbines in this category by 20 percent. This translates into a capacity factor of 40 percent. As a result, Nordex customers using the N117/2400 will be able to achieve high and steady electricity production in regions characterized by lighter winds. The acoustic power level is a maximum 105 decibels, thus allowing the turbine to be used closer to residential areas and ensuring an optimum turbine array in the wind farm. The N117/2400 has also been designed with construction height limits in mind. Thus, with a hub height of 91 meters on the standard tower, it remains below the critical threshold of 150 meters.

The turbine is the result of eleven years of systematic ongoing technical enhancements to the multi-megawatt platform, 26 years of wind power engineering and the experience gained from over 1,300 installed multi-megawatt wind power systems. With the addition of the N117/2400, the Nordex efficiency class now includes a particularly powerful inland turbine. The N117/2400 is scheduled to enter series production in July 2012.

In a further effort to boost the efficiency of its range, Nordex has raised the wind class suitability of its 2.5 MW turbines. Accordingly, Nordex now offers not only the N80/2500 (IEC 1) but also the N90/2500 (IEC 1) for strong-wind locations. The N80/2500 is primarily configured for strong-wind locations which are subject to height restrictions: It has a somewhat smaller rotor diameter compared with the N90/2500 (IEC 1) and is available on 60-meter towers.

Nordex supplies the N90/2500 (IEC 2) and now also the N100/2500 (IEC 2), whose cut-out wind speed has been raised from 20 to 25 m/s, for regions with medium wind conditions. In the inland segment, the N100/2500 (IEC 3) has been joined by the new N117/2400.

At the same time, Nordex has enhanced its existing range of Gamma Generation turbines and harnessed additional increases in turbine yield for its customers by implementing efficiency packages.

By optimizing the interaction of the core components, Nordex was already able to boost the yield by two percent in 2010. Now, Nordex has implemented a second efficiency package, which boosts the yield of the 2.5 MW turbines by a further 2.6 percent. This has been achieved by implementing the \"Nordex Advanced Power\" (Nordex AP) control module in the Nordex Control operation management system. Nordex AP not only measures the wind speed and direction but also the air density. Using this input parameter, the management system is able to adjust the generator to opti-mum effect, resulting in greater yields at low and medium wind speeds. Extensive testing at various locations provides empirical proof of the higher performance curves. Nordex AP is available for N80/2500, N90/2500 and N100/2500 turbines delivered from July 2011 and for the N117/2400 from the start of series production.

Nordex at EWEA 2011: Hall 11, Stand No. 11420


Hamburg, February 2, 2011


Publication and Reprint free of charge; please send a voucher copy to
Nordex SE.


Attention editorial offices: For further questions please contact Mr.
Felix Losada, Nordex SE.

Langenhorner Chaussee 600
22419 Hamburg

Tel: + 49 (0)40/300 30 1000
Fax: + 49 (0)40/300 30 1333
E-mail: flosada@nordex-online.com
Internet: http://www.nordex-online.com



Sprache:

Online-Pressemappe - alle Pressemitteilungen der Nordex SE | RSS-Feed abonnieren


Pressebilder nur für die redaktionelle Verwendung
Hinweis: Für den Inhalt der Pressemitteilung ist der Emittent / Herausgeber der Meldung »DE813076467« verantwortlich.

Die Pressemitteilung "Entering new dimensions in inland regions: Nordex to unveil the high-performance inland N117 wind power system with a nominal output of 2.4 MW at EWEA 2011" von DE813076467 ist auch in folgenden Sprachen abrufbar

Daten werden aktualisiert...
Daten werden aktualisiert...

About Nordex SE

The development, manufacture, project management and servicing of wind turbines in the onshore segment has been the core competence and passion of the Nordex Group and its more than 7,900 employees worldwide since 1985. As one of the world's largest wind turbine manufacturers, the Nordex Group offers high-yield, cost-efficient wind turbines under the Acciona Windpower and Nordex brands that enable long-term and economical power generation from wind energy in all geographical and climatic conditions.

The focus is on turbines in the 3 to 5MW+ class, and the Group’s comprehensive product portfolio offers individual solutions for both markets with limited space and regions with limited grid capacities. With more than 29 GW of installed capacity worldwide, Nordex Group systems deliver sustainable energy throughout more than 80 per cent of the world’s energy market (excluding China).

Nordex SE is listed on the TecDAX of the Frankfurt Stock Exchange. The management holding company is headquartered in Rostock, while the executive board and administrative offices are based in Hamburg. At production facilities in Germany, Spain, Brazil, the US, and India, the Nordex Group produces its own nacelles, rotor blades and concrete towers. The Group also maintains offices and branches in more than 25 countries.

Business areas

Production, sales, finance, project engineering, turn-key projects, service

Products & Services

Our product range with tubular steel towers as well as hybrid towers:

Wind Turbine Type
Rated power in kW
Rotor diameter in m
Delta 4000 N133/4.8 4800 133
Delta 4000 N149/4.0-4.5 4000 - 4800 149
Delta 4000 N149/5.X > 5000 149
Delta 4000 N155/4.X > 4000 155
Delta 4000 N155/5.X > 5000 155
Delta 4000 N163/5.X > 5000 163
Delta N117/3600 3600 117
Delta N131/3600 3600 131
Delta N131/3900 3900 131

More Information about Nordex SE

Press Contact

Felix Losada

Felix Losada
Nordex SE
E-Mail: flosada@nordex-online.com
Phone: +49 (0)40 - 300 30 - 1141