IWR-Pressedienst.de

Pressemitteilungen der Energiewirtschaft seit 1999

fotolia 73444491 1280 256

Press Release

Herausgeber: Deutsche Windtechnik AG

Dismantling concepts for old wind turbines are becoming safer and more efficient

Bremen (renewablepress) - On the afternoon of March 27, 2019, a lattice mast was destroyed by controlled blasting at the Blender wind farm. The 76-metre high tower had been the supporting component of a Vestas V47 (660 kW) wind turbine for 18 years. It was dismantled as part of a larger repowering project and subsequently replaced with newer, more efficient turbines. The blasting was carried out by the leading independent service provider Deutsche Windtechnik in cooperation with experts from Thüringer Sprenggesellschaft. A compilation of the blast is available at: https://youtu.be/YABIxCtnINM

"There is no standard procedure for dismantling old systems. We individually analyse each old turbine and decide what the safest and most efficient dismantling concept is," said Lars Vogler, one of the responsible project managers at Deutsche Windtechnik Repowering. "Particularly in the case of old lattice masts, it is often not worth the effort to dismantle the tower step by step and reassemble it somewhere else. Here at the Blender wind farm, we also had the special situation that the height of the tower and the way it was built would have made it impossible to guarantee the safety of the service technicians during manual disassembly." A controlled blasting has the advantage that it can be planned and carried out at a precise point in time, so it provides a high level of safety. The blasting is prepared and timed so precisely with regard to tower statics that the tower only comes down in a controlled fashion when the blasting expert gives the appropriate signal.


Qualified blasting keeps ground damage low

"For the lattice mast of the V47, the fall direction was designed in such a way that the tower fell directly onto the access road," said Lars Vogler. In addition, the lattice mast had the advantage that the energy generated by the fall was absorbed to a large extent by the steel framework. "As expected, the overall process was relatively quick, and ground damage was kept at a minimum, as planned. This has a positive effect on the cost balance, which depends significantly on the preparation as well as the amount of work necessary for renaturation."


Cost-effective alternative for hub heights over 70 m

The blasting of complete wind turbines or their towers as part of repowering projects are still the exception. "The towers are usually dismantled the conventional way, i.e. disassembled step by step, so that they can be reassembled elsewhere when the old system is sold," Lars Vogler explained. In his view, blasting is always more cost-effective than dismantling in the case of old turbines that cannot be sold, provided the system has a hub height of at least 70 meters. The crane costs, which rise exponentially with the hub height, make up the main savings. The turbine of the V47 had been operated and maintained by Deutsche Windtechnik during recent years, and due to its good technical condition, the nacelle could be dismantled and resold by the repowering experts at Deutsche Windtechnik before the blasting was carried out. The turbine is expected to feed green energy into the grid for a few more years at its new installation site.


About Deutsche Windtechnik AG

Bremen-based Deutsche Windtechnik AG offers a single-source full technical maintenance package for wind turbines in Europe, the USA and Taiwan. The company operates both onshore and offshore. More than 3,600 wind turbines are serviced by over 1,150 employees worldwide as part of permanent maintenance contracts (basic and full maintenance). Its system engineering focuses on Vestas/NEG Micon, Siemens/AN Bonus, Nordex, Senvion, Fuhrländer, Gamesa and Enercon turbines. Further information about the company's focus on repowering is available at deutsche-windtechnik.com/onshore-repowering .


Download press photos:

https://www.iwrpressedienst.de/bild/de-windtechnik/22052_Gittermast_vor_Sprengung.jpg
The lattice mast of Vestas V47 before blasting at windfarm Blender.

https://www.iwrpressedienst.de/bild/de-windtechnik/01604_Gittermast_nach_Sprengung.jpg
The lattice mast of Vestas V47 after blasting at windfarm Blender.

© Deutsche Windtechnik AG


Bremen, 29 March 2019


Publication and Reprint free of charge; please send a voucher copy to Deutsche Windtechnik AG.



Attention editorial offices - For further questions please contact:

Media contact:
Karola Kletzsch
Corporate Communication
Deutsche Windtechnik AG
Tel: + 49 (0)421 – 69 105 330
Mob: + 49 (0)172- 263 77 89
E-Mail: k.kletzsch@deutsche-windtechnik.com


Deutsche Windtechnik AG
Stephanitorsbollwerk 1 (Haus LEE)
28217 Bremen
Tel: +49 (0)421 69105-0
Fax: +49 (0)421 69105-499
E-Mail: info@deutsche-windtechnik.com

Internet: https://www.deutsche-windtechnik.com



Sprache:

Online-Pressemappe - alle Pressemitteilungen der Deutsche Windtechnik AG | RSS-Feed abonnieren


Pressebilder nur für die redaktionelle Verwendung
Hinweis: Für den Inhalt der Pressemitteilung ist der Emittent / Herausgeber der Meldung »DE252570942« verantwortlich.

Die Pressemitteilung "Dismantling concepts for old wind turbines are becoming safer and more efficient " von DE252570942 ist auch in folgenden Sprachen abrufbar

Daten werden geladen...
Daten werden geladen...

About Deutsche Windtechnik AG

Deutsche Windtechnik AG offers a single-source full technical maintenance package for wind turbines in Europe, North America and Taiwan. The company operates both onshore and offshore.

More than 7,500 wind turbines with a rated output of more than 12 GW are serviced by over 2,000 employees as part of permanent maintenance contracts (basic and full maintenance). Its system engineering focuses on Vestas/NEG Micon, Siemens/AN Bonus, Nordex, Senvion, Fuhrländer, Gamesa and Enercon turbines.

Deutsche Windtechnik take occupational safety and environmental protection very seriously, so all of their services are certified in accordance with ISO 9001:2015, BS OHSAS 18001:2007, ISO 14001:2015.

More Information about Deutsche Windtechnik AG

Press Contact

Karola Kletzsch

Karola Kletzsch
Deutsche Windtechnik AG
E-Mail: k.kletzsch@deutsche-windtechnik.com
Phone: +49 (0)421 - 69105 330